For this I needed a new crank puller (a.k.a. extractor, Park Tool CCP-22):
And a new crankset (unbranded):
The crankset was recommended as the current replacement by SJS. Replacing the chainrings with the single chainring I already had on the old crankset.
The crank puller seems OK, though I don’t rate it above my last one, maybe equal to it. Anyway it worked twice which is all I needed. Important is to always remember to grease both threads and the tip of it, since the tip will be grinding against metal.
Here’s one side done, baby started crying that was all I managed that evening:
It’s also worth noting that I grease the bottom bracket axle before putting the new crank on, grease the crank bolt and give it a good tighten if you want it to remain in place. Greasing the axle is meant to decrease the corrosion that can happen between the steel axle and the alloy crank. Similarly greasing pedal threads is a must, which i forgot last time, hence the beginning of the problems I had. There are those that disagree which bits to grease, I sometimes change my mind, but I’ve had more problems by not greasing than by greasing.
After removing the RHS crank I need to swap the chainrings from new to old:
He’s the finished result:
The hawk eyed reader will note that my chainring is not reversible and is getting on in age (miles), when the teeth are like razor blades I’ll swap it, a derailleur setup would need this replacing already, my chain is 1% worn according to my chain wear indicator, I’ll replace that at nearer 2% probably, again derailleur owners would need to replace now.
The finished RHS:
While I was shopping for the above I also bought a saddle, Maddison Prime:
Here’s it fitted, note the road profile of it and the fancy ruler for elite setup:
I just stick it in the middle, angle the nose up a tiny fraction and that’s fine. Maybe I’ll fiddle with it in future, but I tend not to notice much difference. It’s definitely harder than my last saddle, but doesn’t seem to bother me yet as my cycling distances are tiny now I work closer to home and have a baby that takes up my cycling time.
That was that for that night, the next evening I did an oil change and tightened my mudguard bolts (Surrey roads rattle them loose). Next morning I’m all set for commuting again:
What a lovely steel machine she is.
Tags.NET Apple ASP.NET Autumn Bluebell Brakes Broccoli Burley C# Cateye Cats Chain Clothing Commuting Crankset cycling Damson Dynamo Environment Equipment Food GearCable Gears Green Helmet Ladybird Leek Legal Lettuce Lights LINQ LINQ0 LINQ to SQL LINQtoSQL Lunchtime Maintenance Mirror Money Mudguards MVVM MVVMLight Nexus Onion Oracle Pedals Plum Potato Raspberry Raven RavenSportTour Rohloff Rudy RunnerBean Saddle Safety Schwalbe Snow Speed Spinach SportTour SQL SQLServer SQL Server Strawberry Thorn Thunder Tyres UnitTest VB VisualStudio Weather Windows WinForms Winter WPF